This Mechanical Aptitude Test 2 will measure your proficiency in mechanical ratios and relationships. There are 15 questions on the test, and there is no time limit. We have hundreds of Mechanical Aptitude practice questions in our database. You’re welcome to retake the test as many times as you’d like.
You may not skip any of the questions on this mechanical aptitude test. You must answer all 15 questions in order to receive your score. Your score will be shown immediately after you complete the test.
This is our 2nd of 5 different mechanical aptitude tests. You’re welcome to take the tests as many times as you’d like. The tests should contain different questions but they will all be of the same difficulty.
Mechanical Aptitude Test 2
Quiz Summary
0 of 15 questions completed
Questions:
 1
 2
 3
 4
 5
 6
 7
 8
 9
 10
 11
 12
 13
 14
 15
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 15 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
 Not categorized 0%
 1
 2
 3
 4
 5
 6
 7
 8
 9
 10
 11
 12
 13
 14
 15
 Answered
 Review

Question 1 of 15
1. Question
A lever lifts 300 pounds with an effort of 60 pounds. What is the mechanical advantage?
CorrectIncorrect 
Question 2 of 15
2. Question
In a class I lever with an MA of 4, if the effort distance measures 8 feet, how long is the load distance?
CorrectIncorrect 
Question 3 of 15
3. Question
Water is flowing into a tank at the rate of 180 gallons per minute. However, the tank has a leak, and water is leaking out at the rate of 2 gallons per second. How long will it take to add 120 gallons?
CorrectIncorrect 
Question 4 of 15
4. Question
Gear A, with 18 teeth, meshes with gear B, which has 12 teeth. When gear A rotates 3 times, gear B will rotate how many times?
CorrectIncorrect 
Question 5 of 15
5. Question
Water is flowing from a 3inch pipe into a 1inch pipe then into a 4inch pipe. Which statement is true?
CorrectIncorrect 
Question 6 of 15
6. Question
What is the advantage of using triangle shapes in constructing a bridge?
CorrectIncorrect 
Question 7 of 15
7. Question
Which formula will calculate the mechanical advantage of a lever?
CorrectIncorrect 
Question 8 of 15
8. Question
Which of the following is a type of lever?
CorrectIncorrect 
Question 9 of 15
9. Question
In a pulley system, the easiest way to find the theoretical mechanical advantage is to
CorrectIncorrect 
Question 10 of 15
10. Question
Gear A, with 24 teeth, is meshed with gear B, with 12 teeth. For every complete rotation of gear B, how many complete rotations will gear A make?
CorrectIncorrect 
Question 11 of 15
11. Question
If all the items below are the same temperature, which will feel colder to the touch?
CorrectIncorrect 
Question 12 of 15
12. Question
To lift a 600pound piano, Jeff and Scott decide to use a plank placed under one end of the piano. The plank is 3 feet long. If a fulcrum is placed under the plank, one foot away from the piano, how much force must be applied to the plank to lift the piano?
CorrectIncorrect 
Question 13 of 15
13. Question
Water is flowing into a tank through pipe A at 6 gallons per minute and through pipe B at 7 gallons per minute. The water is flowing out of the tank through pipe C at 8 gallons per minute. How much more water will be in the tank at the end of 5 minutes?
CorrectIncorrect 
Question 14 of 15
14. Question
A tank 4 feet wide by 4 feet long holds 800 pounds of water. In pounds per square foot, what is the water pressure at the bottom of the tank?
CorrectIncorrect 
Question 15 of 15
15. Question
If gear A and gear B are meshed, and gear B rotates twice as fast as gear A, the gear ratio of A:B is _______.
CorrectIncorrect